10/11kV Outdoor Epoxy Resin Voltage Transformer
Product Parameters:
· Outdoor epoxy resin voltage transformer · Single Phase or Two Phase · Rated voltage: 3.3kV, 6kV, 10kV, 11kV, 12.5kV, 13.8kV · Metering class of PT: 0.2, 0.3, 0.5, 0.6 · Protection class of PT: 3P, 6P · Standard: IEC, ANSI, GB · Type name: JDZW-11, JDZXW-11, JDZXW-13.8
General
This outdoor epoxy resin type voltage transformer is used in 3.3kV, 6kV, 10kV, 11kV, 12.5kV and 13.8kV power system, for measuring and protection. Phase to grounding voltage transformer with R3 of primary system voltage. It has been used in outdoor pole mounted and transmission line.
Both phase to phase voltage transformer and phase to grounding voltage transformer are made from high quality ultraviolet-proof epoxy resin, high quality CRGO core for metering and protection, primary and secondary use pure electrolytic copper, both winding and core have shielding processing.
Standard All UNISUN Electric instrument transformers are in conformity with IEC standards, and recommendations IEC 61869. Transformers in conformity with specific country standards can also be supplied. (IEEE C57.13, NBR6855).
Specification data she
JDZW-6
6/0.1
6000/√3/100/√3/100/3
10000/√3/100/√3/100/3
Main Structure
A voltage transformer (PT) consists primarily of fivemain components: the core, the primary winding,the secondary winding, the insulation system,the casing and accessories. These components work together to achieve voltage transformation
PT Core
Imported silicon steel sheet made of PT core, high quality insulation tape, high quality compression sponge, to ensure that resin shrinkage does not affect the performance of PT core, secondary use of high purity enameled wire.
Primary winding of PT
Mechanized winding secondary winding, all wire uses high purity copper enameled wire, each layer uses high quality insulating paper, to ensure that the layer withstand voltage qualified, to ensure the stability of partial discharge test.